Pantech
Lightweight enclosed truck bodies in six listed sizes, from car licence (3 pallet) to 14 pallet. External lengths run from 4,300 to 9,200 mm, with approximate body weights from 545 to 2,000 kg.
Get specs & pricing
What is a Pantech?
A Pantech is an enclosed truck body with rigid sides, a roof and rear loading access. It separates the freight space from the cab and protects the load from exposure during transport.
Body photos (33 images)
Select a thumbnail to enlarge. Configurations and accessories shown vary.
Flush Side Access Doors
Add direct side access to selected Pantech bodies, including builds with 30 mm sandwich walls. Both door options use a 30 mm XPS-insulated door panel.
| Door option | Clear opening (W × H) |
|---|---|
| Man Door | 1,000 × 2,000 mm |
| Pallet Door | 1,250 × 2,100 mm |
- Full-length piano hinge with seal
- Internal pinch seals
- Internal cam lock
- Flush, lockable stainless steel latch
- Aluminium kick panel on the lower inside face of the door
Door position and external stair options are confirmed for each build.





Key benefits
- Enclosed freight protection
- Configurations for rental and delivery
- Lightweight modular construction
Key specifications
| Configuration | Specification |
|---|---|
| SuperLight™ Pantech — car licence, 3 pallet | For trucks up to 4,500 kg GVM (car licence) · 4300 x 2200 mm external length × width; 2100 mm internal height · approx. 545 kg |
| 6 pallet Pantech | 4300 x 2495 mm external length × width; internal height confirmed at quote · approx. 725 kg |
| 8 pallet Pantech | 5500 x 2495 mm external length × width; internal height confirmed at quote · approx. 955 kg |
| 10 pallet Pantech | 6700 x 2495 mm external length × width; internal height confirmed at quote · approx. 1,315 kg |
| 12 pallet Pantech | 7800 x 2495 mm external length × width; internal height confirmed at quote · approx. 1,635 kg |
| 14 pallet Pantech | 9200 x 2495 mm external length × width; internal height confirmed at quote · approx. 2,000 kg |
| EN 12642 · Body strength | Manufacturer body classification L / XL; rating is configuration-specific. |
| EN 12640 · Lashing points | Manufacturer-tested point and rail strength; specified fittings and ratings apply. |
| ISO 3795:1989 · Interior materials | Manufacturer burning-behaviour testing; scope is material-specific. |
Lightweight Bodies weights: approximate, calibrated to a weighed 4300 Pantech (545 kg), ±10%, confirmed at quote. Traditional body weights and truck figures are typical estimates. Fuel/energy effects are industry estimates.
SuperLight™ Pantech — car licence, 3 pallet: 4,300 mm external length × 2,200 mm external width × 2,100 mm internal height.
Lengths and widths shown are external. Internal height is confirmed at quote unless listed. Final dimensions, tare and chassis suitability are confirmed for your configuration.
Manufacturer standards refer to body design and specified materials, not certification of the finished vehicle or installation. Final dimensions, tare, inclusions and chassis suitability are confirmed for your configuration.
Printable body specifications
Choose a size for a printable summary of the approved figures. Unconfirmed inclusions are identified on the specification.
Figures last reviewed: November 2026.
Questions about your next body
What Pantech body sizes are available?
Choose SuperLight™ Pantech — car licence, 3 pallet, or 6, 8, 10, 12 or 14 pallet Pantech. The specification table lists external length and width and approximate body weight for each size. The car-licence benchmark is 4,300 mm external length × 2,200 mm external width × 2,100 mm internal height; other internal heights are confirmed at quote. Weights are approximate, ±10%, confirmed at quote.
How much payload will my truck have with a lightweight body?
Payload depends on the complete vehicle: GVM, chassis tare, body, accessories, occupants and other carried equipment. Axle limits and load distribution also matter. A body weight alone does not establish a vehicle's usable payload.
Can I specify side doors, steps or a tail lift?
Discuss your access and loading requirements when requesting a specification. The final body, chassis installation, accessories and their effect on tare and payload need to be assessed together.
Your truck. Your specification.
Get specs & pricing
Tell us what you need. We’ll help you find the right body.
Required: Name, email and what you need. Optional: Mobile and truck or company details.